PH 2/1 Pendant
Design by
Poul HenningsenProduct family
PH 2/1ColourHigh Lustre Chrome Plated
£ 620
Estimated delivery time: 3-5 weekdays
Lightsource: E14 - Not included
Free shipping
Free returns
Designed to inspire
Be inspired or be an inspiration to others. Discover how Louis Poulsen lighting comes to life in homes around the world.
Get the chance to be featured by using @louispoulsen.
About the PH 2/1 Pendant
Poul Henningsen designed the three-shade system back in 1925-1926. The first lights using the system were designed by PH in cooperation with Louis Poulsen for an exhibition in Paris. This partnership continued right up until his death in 1967. Throughout his life, PH sought to create glare-free light, direct light where it was most needed, and create soft shadows, using incandescent bulbs as a light source. The PH 2/1 Pendant is a member of the three-shade family which numbers 30 lights today, including three for outdoor use. Thus PH did not just design a light, but an entire system – around a thousand different models have been produced over the years. This wide selection consisted of table, floor and wall lamps, as well as a number of different chandeliers, which were very popular in the 30s for lighting private homes from high ceilings. There were countless combination options. The lights were available in different colours, as well as a range of sizes. The first shades were made of metal with a painted underside, such as white, gold or silver – depending on whether diffuse, warm or cold light was desired. Glass was later introduced for the three-shade system. In addition to the downward-directed light, glass lamps illuminated the room. PH was the first person to pursue a scientific approach to light and use the logarithmic spiral as a basis. By using a design based on the logarithmic spiral he achieved even distribution of light over the entire curve of the shade. This even light distribution, together with the diffuse reflection through the glass, made it possible to control glare and shadow. Each shade reduces the amount of light equally, due to their distance from the light source. The PH light model numbers refer to the shade size. Each top shade had a corresponding set of middle and lower shades. In the ‘pure’ models, such as the 2/2, the top shade has a size of about 20 cm, with corresponding lower shades. The PH 2/1 Pendant consists of an approximately 20 cm top shade, but uses lower shades from the 1/1 model. These ‘hybrid’ models were introduced due to the desire to hang the pendants at lower heights.
The fixture is designed based on the principle of a reflective three-shade system, which directs the majority of the light downwards. The shades are made of mouth-blown opal three-layer glass, which is glossy on top and sandblasted matt on the underside, giving a soft and uniform light distribution.
- Light sourceLight source E14Lumen: 300ClassIngress protection IP20. Electric shock protection II w/o ground.
- MaterialsShades: Mouth-blown three-layered opal glass with sandblasted inner side.
Suspension: Spun aluminium.FinishMouth-blown three-layered opal glass with sandblasted inner side.
Brass Metallised, Black Metallised or High Lustre Chrome Plated. - Size (mm): 200 (width) x 140 (Height) x 200 (Length)Weight:2.8 kg
- 3 m. Cord.
Canopy included.Mounting instructions - PH 2/1 Pendant top shade glass OpalItem no:5741084898£ 295PH 2/1 / PH 1/1 Pendant/Table/Wall middle shade glass OpalItem no:5741084940£ 190PH 2/1 Pendant/Table/Wall lower shade glass OpalItem no:5741084953£ 170
See full family
Product family
Pendants & ceiling lamps
You might also like
- Variant number
High Lustre Chrome Plated Black textile cord 1x20W E14 5741084908 Black Metallised Black textile cord 1x20W E14 5741099252 Brass Metallised White textile cord 1x20W E14 5741100125 - Variant spec sheet [PDF]Light distribution diagrams [JPG]3D Files

































