About the Bysted Garden Bollard
Installation Guide
BYSTED GARDEN BOLLARDS are available in three versions: with anchor, baseplate, or spike.
The bollard is run by an external driver/adaptor (24V) that must be bought separately. A maximum of four Bysted Garden bollards (14W) can be run by one adaptor.
Anchor
Anchor unit to be fixed in concrete.
Requires installation by certified electrician.
24V:Bollard with anchor unit.
Anchor unit to be fixed in concrete. The bollard use installation cables for in-ground installation for legal fixed installation. Cables are not included. Looping is approved.
Adaptor must be bought separately.

Baseplate
Bollard with baseplate for mounting on surface. Requires installation by certified electrician.
24V:Bollard with baseplate.
Mounting on a surface. Use installation cables for in-ground installation for legal fixed installation. Cables are not included.
Looping is approved.
Adaptor must be bought separately.

Spike
For direct placement into the ground.
Plug-and-Play.
24V: Bollard with spike, T-connector, and 5 m. cable with plugs.
Put the bollard with the spike into the ground. Let the enclosed cable 5 m. run over the ground. The bollard is connected to the
adaptor using standard plugs delivered with the fixture. Plug-and-Play.
Adaptor must be bought separately.

